MT300A

From SOWNWiki
Jump to: navigation, search
GL.iNet GL-MT300A
GL.iNet GL-MT300A
Model GL-MT300A
Maker GL.iNet
System on Chip MediaTek MT7620A
RAM 128MiB0.125 GiB
131,072 KiB
1.220703e-4 TiB
Flash 16MiB0.0156 GiB
16,384 KiB
1.525879e-5 TiB
Wireless 802.11b/g/n (2.4GHz only)
Ethernet 2 x 100mbits/s (WAN and LAN)
Power 1.0A @ 5VDC (USB micro)
FCC ID 2AFIW-MT300A
OpenWRT page https://wiki.openwrt.org/toh/gl-inet/gl-mt300a
Status stalled


The GL iNet MT300A is almost as hackable an OpenWRT router as the AR150. However, the way it organise its wired network interfaces makes things more complicated, as it uses a virtual switch platform which means that the interfaces are actually VLANs rather than interfaces.

It runs Barrier Breaker by default, but should be possible to get Designated Driver on it fairly easily.

Gaining Console Access

Console access is on UDP port 6666. There is a script to do this.

To get into the bootloader, press and hold the reset button for 10 seconds at startup.

In actual fact there are 3 modes:

  • Hold reset for 5 seconds - Factory reset
  • Hold reset for 8 seconds - Serial console
  • Hold reset for 10 seconds - Network console

Getting OpenWRT to boot

In progress

... more about "MT300A"
MediaTek MT7620A +
2 x 100mbits/s (WAN and LAN) +
2AFIW-MT300A +
0.0156 GiB (16 MiB, 16,384 KiB, 1.525879e-5 TiB) +
GL.iNet +
0.125 GiB (128 MiB, 131,072 KiB, 1.220703e-4 TiB) +
GL-MT300A +
1.0A @ 5VDC (USB micro) +
802.11b/g/n (2.4GHz only) +