MR3020
From SOWNWiki
Work in Progress
This page is a work in progress.
It needs information on how to get SOWN packages onto 4MB of Flash.
This work has been allocated to [[allocated to::Scorpia]].
| TP-Link MR3020 | |
|---|---|
| |
| Model | MR3020 |
| Maker | TP-Link |
| System on Chip | AR9331 |
| RAM | 32MiB0.0313 GiB 32,768 KiB 3.051758e-5 TiB |
| Flash | 4MiB0.00391 GiB 4,096 KiB 3.814697e-6 TiB |
| Wireless | 802.11b/g/n (2.4GHz only) |
| Ethernet | 1 x 100mbits/s |
| Power | 255mA (max) @ 5VDC (USB micro) |
| FCC ID | TE7MR3020 |
| OpenWRT page | https://wiki.openwrt.org/toh/tp-link/tl-mr3020 |
| Status | deprecated |
This is a guide for turning the TP-Link MR3020 into a SOWN node.
Flashing with OpenWRT
A detailed guide on flashing the node is available on the OpenWRT wiki at:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020
Sown Setup
Generic instructions for this can be found here.
- Node box numbers in the 410-419 range should be used.
Sown Firmware Install
This device only has 4MB or Flash. The SOWN build typically requires 4-8MB of flash, so the following step are required to cut down on the amount of flash required.
To Be Done