Difference between revisions of "OM1P"

From SOWNWiki
Jump to: navigation, search
(deprecated)
(partially deprecated)
 
Line 13: Line 13:
 
|fcc_id=WT8-OM1P
 
|fcc_id=WT8-OM1P
 
|openwrt_page=https://wiki.openwrt.org/toh/fon/fonera
 
|openwrt_page=https://wiki.openwrt.org/toh/fon/fonera
|status=deprecated
+
|status=partially deprecated
 
}}
 
}}
  

Latest revision as of 12:14, 19 January 2020

logo-yellow.png

Work in Progress
This page is a work in progress.

Requires information on how to flash and how to install Sown software


OpenMesh OM1P
OpenMesh OM1P
Model OM1P
Maker OpenMesh
System on Chip Atheros AR2315A MIPS 4KEc
RAM 32MiB0.0313 GiB
32,768 KiB
3.051758e-5 TiB
Flash 8MiB0.00781 GiB
8,192 KiB
7.629395e-6 TiB
Wireless 802.11b/g
Ethernet 1 x 100mbits/s
Power 1.0A @ 12VDC
FCC ID WT8-OM1P
OpenWRT page https://wiki.openwrt.org/toh/fon/fonera
Status partially deprecated


This is a guide for turning the OpenMesh OM1P into a SOWN node.

Flashing with OpenWRT

Warning: By default OpenWRT ships with CONFIG_LEDS_GPIO turned on. You must disable it else the firmware will not boot and you will get a kernel panic.

The "standard" Meraki/OM1P firmware image is now suitable for these nodes. See the general instructions for building OpenWRT with SOWN packages.

Sown Setup

Generic instructions for this can be found here.

  • Node box numbers in the 200-210 range should be used.


Sown Software Install

To Be Done

... more about "OM1P"
Atheros AR2315A MIPS 4KEc +
1 x 100mbits/s +
WT8-OM1P +
0.00781 GiB (8 MiB, 8,192 KiB, 7.629395e-6 TiB) +
Requires information on how to flash and how to install Sown software +
OpenMesh +
0.0313 GiB (32 MiB, 32,768 KiB, 3.051758e-5 TiB) +
OM1P +
1.0A @ 12VDC +
partially deprecated +